In addition to fire classes A and B, fire class C is particularly relevant in technical operations and laboratories. It describes fires caused by gaseous substances. In this article, you will learn:
Fire class C fires are caused by gases that can ignite rapidly when they come into contact with oxygen and an ignition source. They typically involve an open flame without embers. These fires can also be explosive when large quantities of gas are involved, especially if they spread uncontrollably in enclosed spaces.
Typical substances are:
- Propane, butane, methane (e.g., from gas cylinders or heating systems)
- Hydrogen (e.g., in laboratories or industrial processes)
- Acetylene (e.g., in welding work)
- Ammonia and other technical gases
- Biogas
- Natural gas
Fires involving gaseous substances occur in many industries—especially where gas systems, pressure vessels, or pressure pipes are used. Common locations include:
Only special extinguishing agents are suitable for class C fires. Using water can be dangerous, as it does not extinguish the flames and can trigger uncontrolled reactions.
Suitable extinguishing agents are:
Effective firefighting requires that the gas supply be reliably shut off first. This is the only way to prevent further spread.
Depending on the area of application, different fire extinguishers can be used:
Gases are often odorless, colorless, and without visible warning signs. Even the smallest leaks can pose a high fire risk. Many gases are heavier than air and accumulate near the floor—particularly critical in basements, shafts, and unventilated rooms. A safe environment can only be created through clearly regulated measures:
Gas fires are among the most critical types of fires in commercial environments. Safety is achieved through the right equipment, expert maintenance, and trained personnel. CWS Fire Safety supports you with suitable fire extinguishers, sound advice, and customized fire protection concepts.